bow tie neck top

0:00Hello freinds

0:23U can ur variations in neck,i made big tie lengthwise,,,u can make small n in neck cut semicircle n down again u or semicircle on front neck , or cut semicircle n slit down 2 or 1 inch ...

0:30Or cut v n then 2" Slit in center on front shirt pattern,(mark neck line 7" deep with v shape neckline n 3" width on folded fabric start cutting on marked lines n from the center extend a slit 2 more inches)

1:19Semicircle n u of 2" down other neck on paper which iam cutting on my shirt,

1:21On 1:39 time again clear video sorry for this black part camera problem

1:43On 1:39 time again clear video

1:51Folded by front shirt cloth n transfering my shirt fitted pattern on front fabric,

1:57By leaving 1" seam allowance,

2:49On my other dress there is same neck,so iam transfering its neck patern on my front fabric,

3:14Cutting my marked pattern with pen on front fabric,

4:05There is slant line of half inch towards neck from armhole on shoulders,

4:24Cutting neck first i was cutting v neck n slit but now i decided to cut semicircle n down slight u of 2" or semcircle neck

4:53Marked back neck n dress pattern on my fabric too,

4:57Kept front pattern on back cloth,

5:04Tracing this with pen then cutting,cutting back

7:00I have cuted small strip for down u of 2" to conceal raw edges of u slit,folding quarter inch towards wrong side n giving stitch hem line , now place strip on slit facing right on right n start sewing on wrong side of strip.

7:02placing on right side of top just adjacent to slit join the strip,give sharp free returing towards other sides join the strip with left side of top the stitchline should be narrow with the v or v shape,

7:33Attach this strip to slit by heming on wrong side ,now turn raw edges of strip towards wrong side n give top stitch or by double folding quarter inch on wrong side hem it again on slit,this is how it looks.

7:55Now lets join sides n shoulders of shirt front n back together, now aline front n back panels n joins the shoulder lines towards the wrong n sew it n also do overlocking towards shoulder sides for the concealing.see i join the shoulder lines.

7:57This is my tie srtip fabric its too long lengthwise,,,better to do short tie, i have had extra fabric so i made long,

7:59Folding cloth in width and stitching on both ends slant lines n concealing all straight by hem in folding in half widthwise,leaving neckline space open on strip,like collar

8:01For this bow tie collar pattern with length of 6 inches n width of 70 inches, on the folds mark 12.5 inches on each side from center,

8:24Now run the tape all around the neckline starting from the center front run the inch tape towards the center back again till it reaches the center front ,total neck length here is 25 inches.

9:13For this bow tie collar pattern with length of 6 inches n width of 70 inches, on the center folds mark 12.5 or 13 inches on each side from center n on edges of both corners total is 25" , the fold iam marking 12.5 " on both sides n on sides sew or hem slant lines n start sewing from both edges till it reaches marked points of 12.5 inches on both both sides of strip,that means u should not sow in the center ,from the marked point towards the edge start sewing

9:29Towards corners u can give slanting cut too then sew slant lines,

9:31Leave the center open 12.5 or 13 inches on both sides n start sewing till it reaches end edges or slant line on both sides,

9:37Cut or Remove all the extras and pull inside out,

11:21Pulling inside out,

11:26Towards the center of strip fold the raw edges in on either side ,1 cm seaming allowance is folded in this way we can easily join to neckline.

11:28Further 25 inches u have to fold 1cm in n press it , now this is center back place center strip joining n should match with center back neckline notch ,place neckline in center or middle of strip n pin like this,

11:30secure with pins with 1cum seaming allowance,

11:32

11:34Keep inserting neckline in middle of strip til center of strip, n secure wd pins,in this way u wont get fold in collar n easy to sew,start from center back till it reach center front without any folds secure with pins,

11:36and towards the center front place the strip joining slit inside the strip n secure with pins,if u see towards right side seeing the conceal part of neckline,

11:57Firstly mark center of strip n mark center of back neckline n pined it u can see my pin in center,Placing neckline fabric in middle or center of collar or bow tie strip by folding tie 1cm inside ,

12:43Extra 0.5 inch of tie opened on both sides sew it by folding 1 cm inside on both sides, as we left 13" 1 inch extra 0.5" on each side,

12:50Thankyou please subscribe